The P-Clamp is mounted on the Booster Frame with a 10-32 socket cap screw and a brass washer with the Ribbon Cable going through it. The clamp is mil-spec (also called a Adel Clamp) and made by UMPCO, Xacto manufactures a version as well. The model numbers used where MS21919-DG18 or MS21919-DG14.
There are variations on the direction the Clamp points and size of the clamp, not all the packs are the same and it is unclear if the identified clamps were the original Clamps used on the GB1 packs or if they were replaced for the GB2 packs,
Join the community
Sign up free to join the GBFans.com community.
Free accounts post in the forum, upload to the gallery, edit the wiki, and follow your favorite franchises. No credit card. No catch.
the following photos only illustrate packs used in Ghostbusters 2( identified as Gb2 by their using a Spectra Strip)
The following photos show the #14 P-Clamp
This photo shows the #18 P-Clamp