I designed the ghostbuster track suit myself. I made four of them in total, for myself, my brother and two friends. I bought four cheap jackets and track pants. I bought some black and yellow stripe fabric which I cut strips on a bias which was then sewn in with some black piping to create the hazard stripes down the side of the pants and jackets. I cut the big ghostbuster logo out of vinyl then sewed it on the back. I purchased the patches and sewed them on the shoulder. The name tags were made out of iron on transfer fabric. As for the ghostbuster shoes I took a pair of knock off white converse and then added logos and lettering with iron on transfer paper which you can just use in an ink jet printer. I brushed over the decals with shoe goo to protect them. Then I painted a red stripe on the shoe with pasti dip and created the licence plate with vinyl ink jet paper. I then glued the licence plate logo to a sheet of yellow latex I made by saturating some cotton baton with latex. These were then contact cemented to the back of the shoe. For the medallions I cut the shape of the logo out of aluminium, I tact sprayed it so that I could place the gems without them moving around (the gem placement took 5 hours) and then I put it in the oven to heat up the adhesive that is already on the back of the gems. This fused them to the aluminium. I use 400 degrees in the oven for 10 mins and then i turned the oven off and let them cool completely. The sunglasses were simple, I removed the arms and spray painted them with plastic fusion white spray paint. Then printed out the logos with clear decal paper and cut it out and put them on. Finally I gave it a couple of coats of clear coat to protect it. I also made the Slimmer, I used the same process as my big Slimmer costume. You can read about how I made that on my profile. The general idea is that I used upholstery foam and cut and glued it into the general shape. Then used cotton baton soaked it green tinted latex over the foam to add strength and details. The teeth and tongue are also types of foam and I made the medallion the same way as mine except I used glitter instead of gems. And it didn’t need to go in the oven, just glued the glitter and coated it in clear coat.
