User avatar
By Gatchigirl
#4981777
I decided to add a rechargeable battery pack and charging port to my Halloween dot com PKE Meter. This thing is a slightly more screen accurate on the case. The handle is more square than the Spirit/Rubies one but shares the electronics from it. I also changed out the LED's in the wings because they were green with the ones in the Spirit Meter. Here's a photo of the completed mod. This was just before I secured the battery and left the charger where I can access it by opening the battery door and not opening up the whole meter. It was just a simple solder the charger into the positive side of the switch and the negative off the meter for the batteries. Took about an hour with the cutting I had to do with the battery compartment to make the thing close properly.
Image
Image

Notice in the second image of the meter, that the handle is square and then more rounded towards the buttons. In fact it uses the same buttons as the Spirit/Rubies Meter.
ccv66, kman liked this
    Proton Props UK

    Information on the "prize draw&quot[…]

    Hasbro Ghostbusters

    While you're 100% correct about the function[…]

    Uniform Tips

    It does rain frequently here in London, but not to[…]

    The yellow parts are raw 3D prints, unsanded and u[…]