Page 2 of 2

Re: Hasbro Ghostbusters Proton Blaster M.O.D. Modification /Spirit Halloween Spengler pack MOD Project

Posted: February 24th, 2022, 7:28 am
by BRD 527
I like your TVG mod replacing the crank knob I did that to one of my Spirit packs :love:

Have you thought at all about adding the light too? I have CatEye HL300's on both my spirit packs which is whats used on the GBII Slime blowers and the pack lights in TVG look to be modeled after them. I absolutely love the lights its like having a shoulder lamp like the Colonial Marines in Aliens lol! :blush:

They have a cheeper version of the light here in the shop
https://www.gbfans.com/shop/blower-part ... headlight/

Re: Hasbro Ghostbusters Proton Blaster M.O.D. Modification /Spirit Halloween Spengler pack MOD Project

Posted: February 24th, 2022, 4:03 pm
by GBfan77
BRD 527 wrote: February 24th, 2022, 7:28 am I like your TVG mod replacing the crank knob I did that to one of my Spirit packs :love:

Have you thought at all about adding the light too? I have CatEye HL300's on both my spirit packs which is whats used on the GBII Slime blowers and the pack lights in TVG look to be modeled after them. I absolutely love the lights its like having a shoulder lamp like the Colonial Marines in Aliens lol! :blush:

They have a cheeper version of the light here in the shop
https://www.gbfans.com/shop/blower-part ... headlight/
Thanks for the compliment. I do plan to add a light. There's a light in the Blaster MOD that I don't need, It's the firing light, So what I plan to do is run the light to the pack so that when the thrower is in use the red dome lights up. Additional lighting might be something to look into. Thanks for sharing the link.

Re: Hasbro Ghostbusters Proton Blaster M.O.D. Modification /Spirit Halloween Spengler pack MOD Project

Posted: February 24th, 2022, 5:05 pm
by GBfan77
Having some difficulty with the Blaster's sound chip. For starters it isn't loud enough. I have swapped out the speaker for something louder and that has helped but it's still not as loud as the Spengler wand. I have tried to use an amplifier but that only makes the idle effect sound like farting. I may at some point replace the sound chip but for now I'm going to work with what I have,

Re: Hasbro Ghostbusters Proton Blaster M.O.D. Modification /Spirit Halloween Spengler pack MOD Project

Posted: April 7th, 2022, 8:27 pm
by XyIsNew2_GB
can you do a tutorial for the electronics? i want to do this with mine but im not very good with soldering

Re: Hasbro Ghostbusters Proton Blaster M.O.D. Modification /Spirit Halloween Spengler pack MOD Project

Posted: April 8th, 2022, 1:52 pm
by GBfan77
XyIsNew2_GB wrote: April 7th, 2022, 8:27 pm can you do a tutorial for the electronics? i want to do this with mine but im not very good with soldering
I could give it a try. Never did an instruct able before, but it's pretty straight forward. I'll need to take the gun apart for reference pics though but that's not an issue.

Re: Hasbro Ghostbusters Proton Blaster M.O.D. Modification /Spirit Halloween Spengler pack MOD Project

Posted: April 10th, 2022, 5:36 am
by XyIsNew2_GB
thanks!

Re: Hasbro Ghostbusters Proton Blaster M.O.D. Modification /Spirit Halloween Spengler pack MOD Project

Posted: April 11th, 2022, 4:38 pm
by XyIsNew2_GB
I bought the switches 2 days ago, it arrives today, I plan on doing it as soon as I get them.

Re: Hasbro Ghostbusters Proton Blaster M.O.D. Modification /Spirit Halloween Spengler pack MOD Project

Posted: April 15th, 2022, 5:24 am
by XyIsNew2_GB
hey dude the switches came today! i am going to do them tomorrow, i wanted to ask if all the switches that you put do something/have a purpose?

Re: Hasbro Ghostbusters Proton Blaster M.O.D. Modification /Spirit Halloween Spengler pack MOD Project

Posted: April 17th, 2022, 7:57 am
by GBfan77
Sorry it took so long to get back to you. Work has been keeping me busy. There's a diagram of sorts that should help with your switches.
Image
Image

As for the twitches I used, I have a Jupitor electronics lighting kit so one twitch activates that. The other , the one at thew firing button, is a kill switch for the sound effects.

Re: Hasbro Ghostbusters Proton Blaster M.O.D. Modification /Spirit Halloween Spengler pack MOD Project

Posted: April 17th, 2022, 8:04 am
by GBfan77
Now that it's getting warmer I've had a chance to paint the thrower. There's some of the blue plastic showing through but nothing a bit of silver can't cover up.

https://live.staticflickr.com/65535/520 ... 06d5_k.jpg

Re: Hasbro Ghostbusters Proton Blaster M.O.D. Modification /Spirit Halloween Spengler pack MOD Project

Posted: April 17th, 2022, 10:42 pm
by XyIsNew2_GB
Thank you SO MUCH! im doing it right now.

Re: Hasbro Ghostbusters Proton Blaster M.O.D. Modification /Spirit Halloween Spengler pack MOD Project

Posted: April 17th, 2022, 10:45 pm
by XyIsNew2_GB
GBfan77 wrote: April 17th, 2022, 7:57 am Sorry it took so long to get back to you. Work has been keeping me busy. There's a diagram of sorts that should help with your switches.
Image
Image

As for the twitches I used, I have a Jupitor electronics lighting kit so one twitch activates that. The other , the one at thew firing button, is a kill switch for the sound effects.
Do you think that 2 pin switches will work? Thats what i bought.

Re: Hasbro Ghostbusters Proton Blaster M.O.D. Modification /Spirit Halloween Spengler pack MOD Project

Posted: April 17th, 2022, 11:19 pm
by XyIsNew2_GB
GBfan77 wrote: April 17th, 2022, 7:57 am Sorry it took so long to get back to you. Work has been keeping me busy. There's a diagram of sorts that should help with your switches.
Image
Image

As for the twitches I used, I have a Jupitor electronics lighting kit so one twitch activates that. The other , the one at thew firing button, is a kill switch for the sound effects.
do you mind show me how it works?
Like a demo or something

Re: Hasbro Ghostbusters Proton Blaster M.O.D. Modification /Spirit Halloween Spengler pack MOD Project

Posted: April 18th, 2022, 9:00 pm
by XyIsNew2_GB
GBfan77 wrote: April 17th, 2022, 7:57 am Sorry it took so long to get back to you. Work has been keeping me busy. There's a diagram of sorts that should help with your switches.
Image
Image

As for the twitches I used, I have a Jupitor electronics lighting kit so one twitch activates that. The other , the one at thew firing button, is a kill switch for the sound effects.
Hi dude! I am almost done, its now quite like yours. I did some modifications to make it compatible. One of the switches don't do anything but the rest do. Here it is
Image

Re: Hasbro Ghostbusters Proton Blaster M.O.D. Modification /Spirit Halloween Spengler pack MOD Project

Posted: May 23rd, 2022, 7:12 am
by GBfan77
Looking Good so far man, can't wait to see the finished product.

Got an update of my own project. Got a few videos uploaded.




Re: Hasbro Ghostbusters Proton Blaster M.O.D. Modification /Spirit Halloween Spengler pack MOD Project

Posted: May 23rd, 2022, 1:49 pm
by gman666
What did you use on the MOD wand for the clippard valve?

Re: Hasbro Ghostbusters Proton Blaster M.O.D. Modification /Spirit Halloween Spengler pack MOD Project

Posted: May 23rd, 2022, 1:56 pm
by GBfan77
I had one that was 3d printed. It was from a kit that was broken in storage but the parts were salvageable.