- February 6th, 2020, 8:30 pm#4930893
I get asked frequently for a list of parts necessary to build a replica Proton Pack.
Here are some links to items that are needed for the build:
Main Parts
-Fiberglass Shell
-Motherboard
-ALICE Frame
-Mounting Brackets
-Mounting Hardware (Bolts, Nuts, Standoff / Spacers).
Attachment Parts
-Booster Tube (Aluminum or ABS)
-Booster Frame (Resin)
-Booster Plug (Resin or built into Aluminum tube)
-HGA (Aluminum or Resin)
-Filler Tube (Aluminum or Resin)
-Beamline Tube (Aluminum or Resin)
-Vacuum Tube (Aluminum or Resin)
-N-Filter (Aluminum or one built into shell)
-Injector Tubes (Aluminum or Resin)
-Ion Arm (Aluminum or Resin)
-Bumper (Resin)
-Various Mounting Hardware (Bolts & Epoxy)
Accessory Parts
-Clippard Elbow Fittings (2 for GB1, 3 for GB2)
-Legris Elbows or SMC Elbow Fitting (3 required)
-Ion Arm End Cap (GB1 or GB2)
-Crank Knob (Resin or Replica)
-Legris Straight Fittings
-Dale PH-25 Resistor
-Dale RH-25 or Sage M25W or Pacific Resistor
-Dale RH-50 Resistor
-Clippard R-331 Valve (or R-701 if you prefer)
-Bellows
-Ribbon Cable (GB1 or GB2)
-Ribbon Cable Aluminum Hold Down Clamp
-Ribbon Cable Clamp (GB1: 1-1/4" or GB2: 7/8")
-Stickers (Standard & Metallic)
-Dry Rub Transfers
-ALICE Frame Padding
Tubing
-4mm OD Yellow Tubing (1 foot)
-1/4" OD Red Tubing (2-3 feet)
-1/4" OD Blue Tubing (2-3 feet)
-1/4" Split Loom (1-2 feet)
-3/4" Split Loom (4-5 feet)
Electronic Parts
-Amplified Sound Board
-Power Cell & Cyclotron Light Kit
-Power Cell Connection Ribbon Cable
-Speaker
-Battery
-Wire (for speaker and battery connection)
See also wand parts for more.
Here are some links to items that are needed for the build:
Main Parts
-Fiberglass Shell
-Motherboard
-ALICE Frame
-Mounting Brackets
-Mounting Hardware (Bolts, Nuts, Standoff / Spacers).
Attachment Parts
-Booster Tube (Aluminum or ABS)
-Booster Frame (Resin)
-Booster Plug (Resin or built into Aluminum tube)
-HGA (Aluminum or Resin)
-Filler Tube (Aluminum or Resin)
-Beamline Tube (Aluminum or Resin)
-Vacuum Tube (Aluminum or Resin)
-N-Filter (Aluminum or one built into shell)
-Injector Tubes (Aluminum or Resin)
-Ion Arm (Aluminum or Resin)
-Bumper (Resin)
-Various Mounting Hardware (Bolts & Epoxy)
Accessory Parts
-Clippard Elbow Fittings (2 for GB1, 3 for GB2)
-Legris Elbows or SMC Elbow Fitting (3 required)
-Ion Arm End Cap (GB1 or GB2)
-Crank Knob (Resin or Replica)
-Legris Straight Fittings
-Dale PH-25 Resistor
-Dale RH-25 or Sage M25W or Pacific Resistor
-Dale RH-50 Resistor
-Clippard R-331 Valve (or R-701 if you prefer)
-Bellows
-Ribbon Cable (GB1 or GB2)
-Ribbon Cable Aluminum Hold Down Clamp
-Ribbon Cable Clamp (GB1: 1-1/4" or GB2: 7/8")
-Stickers (Standard & Metallic)
-Dry Rub Transfers
-ALICE Frame Padding
Tubing
-4mm OD Yellow Tubing (1 foot)
-1/4" OD Red Tubing (2-3 feet)
-1/4" OD Blue Tubing (2-3 feet)
-1/4" Split Loom (1-2 feet)
-3/4" Split Loom (4-5 feet)
Electronic Parts
-Amplified Sound Board
-Power Cell & Cyclotron Light Kit
-Power Cell Connection Ribbon Cable
-Speaker
-Battery
-Wire (for speaker and battery connection)
See also wand parts for more.
For the fastest way to get in contact, please email me: webmaster@gbfans.com
Like GBFans on Facebook: http://www.facebook.com/gbfans
Follow GBFans on Twitter: @gbfans
Like GBFans on Facebook: http://www.facebook.com/gbfans
Follow GBFans on Twitter: @gbfans