- September 10th, 2018, 9:32 pm#4908478
Good afternoon everyone. I just got my PKE in from Spirit Halloween and I decided to immediately take it apart for documentation purposes. It seems to tear down very easily, only six small phillips head screws secure the shells together. When the shells are apart, the belt clip is held on with a single metal screw with a large flat head like a washer. I couldn't remove the screen without destroying the method it's secured. It seems to be held on with four melted plastic fusing points, the wing LEDs are unusually modular with white connectors that can be detached, this could be very convenient for modding. The motor is soldered directly to the board. It appears to have two microswitches to determine whether the wings are extended or closed.
Update 9/26/2018: Here is a video of the front of the PCB in action. https://imgur.com/aXn74Ih
9/26/2018 Update: I've added the front side of the PCB images below. PCB dimensions are 1.45 inches wide and 1.95 inches tall.
Updated photos 9/26/2018: PCB front
Update 9/26/2018: Here is a video of the front of the PCB in action. https://imgur.com/aXn74Ih
9/26/2018 Update: I've added the front side of the PCB images below. PCB dimensions are 1.45 inches wide and 1.95 inches tall.
Updated photos 9/26/2018: PCB front
Last edited by SentientPie on September 26th, 2018, 2:40 pm, edited 2 times in total.