User avatar
By GBRich
#5001298
Helle everyone

I recently finished modding a life-size Spirit pack, so now I need a ghost trap!

While I'd love one of the Haslab Two in a Box, I missed the crowdfunding last year so it's unlikely I'll be able to pick one up for a reasonable price, so now I'm thinking about buying and then modding Spirit's ghost trap as they look pretty reasonable.

However, if there's one thing I learned from Spirit's proton pack its that there are quite a few inaccuracies, so how accurate is their ghost trap?

I'm not very familiar with it, and I'm not expecting perfection given that it's only around £50, but are there any areas that stand out as being very different to the films? Like the cyclotron etc does on the proton pack?

Also I'm pretty new to this forum so if anyone can give any guidance on doing this or recommend any previous posts, that would be appreciated.
#5001305
If you're going for screen accuracy... it ain't the way to go. the seam between the two halves of the shell is blatantly obvious and it's missing key parts (knobs, etc) for accuracy, i'd recommend looking into something 3d printed, but for a super budget project, go for it! I modded up one and it looks great, but mine was influenced by afterlife's pack mods and gbtvg's trap mods, so it's a far cry from screen accurate.
#5001310
Thank you, that's really helpful!

Yeah I didn't think it would be terribly screen accurate, but I've done some more research and there seems to be a few sellers on eBay or Etsy selling upgrade kits to replace some of the switches and resistors etc.

This guy did a really good video on customising his:

https://www.youtube.com/watch?v=YSFk37MEUYc

Still considering it, but I'd like a working foot pedal as well which I can already tell is going to be tricky!
The_Y33TER liked this
#5001323
GBRich wrote: November 11th, 2024, 1:45 am Still considering it, but I'd like a working foot pedal as well which I can already tell is going to be tricky!
There is a post here recently that is a conversion kit for the spirit to walmart trap electronics (adding door motors, etc.)
Keep your eyes peeled for updates on that.
#5001331
Thanks!

I didn't know that Walmart did one too, is it this one?

https://www.walmart.com/ip/Ghostbusters ... pe=VARIANT

From what I can see, that looks exactly the same as the Spirit one, so they're probably sourcing from the same manufacturer:

https://www.spirithalloween.com/product ... 164228.uts

One inaccuracy I have noticed about both of them is that, with a screen accurate one like the Haslab, there's a silver panel on the front, but on these two that area is black. Might need to work out how I can make that work better.
#5001343
GBRich wrote: November 12th, 2024, 3:05 am One inaccuracy I have noticed about both of them is that, with a screen accurate one like the Haslab, there's a silver panel on the front, but on these two that area is black. Might need to work out how I can make that work better.
Spongeface has a kit on his ebay.
GBRich wrote: November 12th, 2024, 3:05 am I didn't know that Walmart did one too, is it this one?

https://www.walmart.com/ip/Ghostbusters ... pe=VARIANT
No. That's also a spirit trap. The walmart trap is no longer offered.
#5001366
I heard in terms of size the Spirit/Wallmart traps are actually the most accurate compared to GB1 (in length).

The Matty is based on the GB2 stunt trap held by Egon when entering the jewelery shop (much smaller than the GB1 size trap used in the courtroom), and the Haslab Two in the Box appears the same size as the Matty (though more accurate). Hasbro on top Matty on bottom.

Image

Is that true?

Does anyone have a pic of the spirit and Matty together?
#5001490
Thanks guys, that's really helpful.
The_Y33TER wrote:GBRich wrote: ↑
November 12th, 2024, 3:05 am
One inaccuracy I have noticed about both of them is that, with a screen accurate one like the Haslab, there's a silver panel on the front, but on these two that area is black. Might need to work out how I can make that work better.
Spongeface has a kit on his ebay.
Do you have a link for this kit? I've looked on eBay and can't find anything for this or Spongeface?

Also, has anyone replaced the sides on the Spirit trap with actual aluminium?

I'd like to make those parts look as realistic as possible, but it looks like they're moulded so probably not possible.

Perhaps covering them with aluminium plates?

Or spray painting them? Can anyone recommend a very realistic aluminium/silver/chrome spray paint? One that looks like realistic metal, not just normal silver?
#5001493
This post may contain an affiliate link that helps support GBFans.com when you make a purchase at no additional cost to you.

GBRich wrote: November 18th, 2024, 2:47 am Thanks guys, that's really helpful.
The_Y33TER wrote:GBRich wrote: ↑
November 12th, 2024, 3:05 am
One inaccuracy I have noticed about both of them is that, with a screen accurate one like the Haslab, there's a silver panel on the front, but on these two that area is black. Might need to work out how I can make that work better.
Spongeface has a kit on his ebay.
Do you have a link for this kit? I've looked on eBay and can't find anything for this or Spongeface?

Also, has anyone replaced the sides on the Spirit trap with actual aluminium?

I'd like to make those parts look as realistic as possible, but it looks like they're moulded so probably not possible.

Perhaps covering them with aluminium plates?

Or spray painting them? Can anyone recommend a very realistic aluminium/silver/chrome spray paint? One that looks like realistic metal, not just normal silver?
https://www.ebay.co.uk/str/ghostlab42 that's Spongeface's ebay storefront.

Regarding side plates, some folk paint them, some use thin aluminium sheets over the top of the existing plates. The real props were aluminium. The silver front panel you refer too was also aluminium.

    So, let me get this straight: if I buy the Xiaom[…]

    Yeah, ok, so so far the GB2 light sequence mig[…]

    And now also on the Bueno website: https://buen[…]

    Sad to hear. Moreso during the holidays. And we kn[…]