By troberts289
#4971142
Spent the last few evenings mounting tanks. There's a lot of fussing and fiddling involved.

I added another crossmember to give myself another mounting point for the main tank. It's not accurate, but no one will be able to see it once the vest is on. I also used bolts to mount the side tank. The real deal used pop rivets, but I wanted to be able to remove them if a repair is needed in the future.

Image

And speaking of the vest, If you ever wondered if it was really necessary, the answer is YES. This hurt:

Image
Image

The center of gravity is way higher on this than it is on the pack. with just 2 straps it feels like being cut into 3rds.
tobycj liked this
By troberts289
#4971763
I took a weekend or two off from the blower for a project in the woodshop; But I'm back to slowly working out details.

Image

The electronics are mostly done on the pack. This was my solution for the power cell. In hind site, this approach made it tricky to screw the box on after everything was installed, but it works.

Image

This was a small concession. It doesn't look like the originals had a second set of quick disconnects on the back side of the pump box, the Zooka hoses were just attached directly to it. I decided to ignore that and added the disconnects anyway. I wanted to be able to disconnect the hoses at both ends just to make moving/displaying/ wearing this thing a little easier.
Image
DoctorPepper liked this
By troberts289
#4971764
Details left to go:

*Still looking for that elbow for the spherical tank. It's an elusive bugger. I might 3d print and electroplate it as a last resort.

* Still have to wire the lights in the zooka

*Trying to encourage my seamstress wife to get started on the vest. I think we found very close matches for all the fabrics

* Trying to decide how much relicing I want to do. I was considering dripping some epoxy with pink dye in it around the plumbing fittings.

Has anyone out there tried that? I'm wondering how it will look. I have experience with epoxy dripping effects on accident, but I've never tried to do it on purpose
By GuyX
#4974415
troberts289 wrote: November 12th, 2022, 3:40 pmImage
Holy crap.

When I see fans post amazing stuff like this I think “ gee I’m a lazy talentless hack” haha.

Wow. Great job.

Someone needs to document a build like this just like Adam Savage does & record it on camera. I’d love to see that.
By troberts289
#4974417
I still have a lot of details to do on the vest. The real props had extra padding on the belt, and extra elastic straps on the middle and top to help distribute the weigh.

Take my word for it, you need that. I could only wear it all at the party for about 30 min in it's current state. With the all metal zooka, this thing weighs in at 65lb.

DancingToaster's post also helped bring an Aaron W[…]

My theory: The kids go to NYC for some kind of fi[…]

So, another mystery solved...but it's the wrong […]

Proton Props UK

Unfortunately no response yet...