If they don't meet the backing do you get your money back if that happens? I want to jump on this but the having to wait a full year...Look GB fans are patient, I get it. But still...It's a bit pricey for a non fixer upper opportunity. I could buy a decent 3d printer for that amount.
(Don't get me wrong the pack looks fantastic. I just have my concerns.)
- October 27th, 2021, 8:43 pm#4958323
- October 27th, 2021, 8:53 pm#4958324
Yah 2023 is so far away that's the biggest bummer in all this
timeware wrote: ↑October 27th, 2021, 8:43 pm If they don't meet the backing do you get your money back if that happens? I want to jump on this but the having to wait a full year...Look GB fans are patient, I get it. But still...It's a bit pricey for a non fixer upper opportunity. I could buy a decent 3d printer for that amount.Yes you will get your money back in full.
(Don't get me wrong the pack looks fantastic. I just have my concerns.)
Yah 2023 is so far away that's the biggest bummer in all this
- October 27th, 2021, 9:21 pm#4958325
Fine print for the video they have says
"If campaign reaches minimum 7,000 backers by December 12, 2021, your payment method will be charged."so it seems less a matter of getting money back and more that you need to remember to keep the money in your account until then.
Corey91 liked this
- October 27th, 2021, 9:48 pm#4958327
jonogunn wrote: ↑October 27th, 2021, 8:53 pmEh I would rather wait 18 months and get this, then to not have it exist at all. I suspect covid and shipping issues are what pushed the delivery date back so far. In the past I guess a year is the norm.timeware wrote: ↑October 27th, 2021, 8:43 pm If they don't meet the backing do you get your money back if that happens? I want to jump on this but the having to wait a full year...Look GB fans are patient, I get it. But still...It's a bit pricey for a non fixer upper opportunity. I could buy a decent 3d printer for that amount.Yes you will get your money back in full.
(Don't get me wrong the pack looks fantastic. I just have my concerns.)
Yah 2023 is so far away that's the biggest bummer in all this
ECTO88MPH'S STUDIO CREATION/MATTY THROWER BUILD (2014)
viewtopic.php?f=2&t=32683&p=4817329&hil ... h#p4817329
ECTO88MPH'S AFTERLIFE "SPIRIT/HASBRO" PACK (2021)
viewtopic.php?f=2&t=47436&p=4945545&hil ... e#p4945545
viewtopic.php?f=2&t=32683&p=4817329&hil ... h#p4817329
ECTO88MPH'S AFTERLIFE "SPIRIT/HASBRO" PACK (2021)
viewtopic.php?f=2&t=47436&p=4945545&hil ... e#p4945545
- October 27th, 2021, 9:54 pm#4958328
Your card won't be charged until December 12th, so you'll just want to make sure the money is there on that date. You're charged absolutely nothing in the meantime.
Also NO 3-D printer will come close to putting out a pack this nice at this price point.
Hasbro equipment is far superior to anything coming out of one of those.
Not to mention with lights and sounds, etc.
No fan out there will be making an Afterlife pack this good at this price.
Also NO 3-D printer will come close to putting out a pack this nice at this price point.
Hasbro equipment is far superior to anything coming out of one of those.
Not to mention with lights and sounds, etc.
No fan out there will be making an Afterlife pack this good at this price.
Want to mod your HasLab Pack, Trap, or PKE meter? Join the Facebook group:
https://www.facebook.com/groups/ghostbustersmodders
Putting together your proton pack with Mack's Factory Parts? Join the Facebook group:
https://www.facebook.com/groups/2806200899664790/
https://www.facebook.com/groups/ghostbustersmodders
Putting together your proton pack with Mack's Factory Parts? Join the Facebook group:
https://www.facebook.com/groups/2806200899664790/
- October 27th, 2021, 10:10 pm#4958329
deadderek wrote: ↑October 27th, 2021, 9:54 pm Your card won't be charged until December 12th, so you'll just want to make sure the money is there on that date. You're charged absolutely nothing in the meantime.I was going to build a 3d printed pack as my next project. Would you say the amount of PLA filament for printing out the shell alone come close to 400?
Also NO 3-D printer will come close to putting out a pack this nice at this price point.
Hasbro equipment is far superior to anything coming out of one of those.
Not to mention with lights and sounds, etc.
No fan out there will be making an Afterlife pack this good at this price.
- October 27th, 2021, 10:54 pm#4958336
Just blew 3,000 backers!
Want to mod your HasLab Pack, Trap, or PKE meter? Join the Facebook group:
https://www.facebook.com/groups/ghostbustersmodders
Putting together your proton pack with Mack's Factory Parts? Join the Facebook group:
https://www.facebook.com/groups/2806200899664790/
https://www.facebook.com/groups/ghostbustersmodders
Putting together your proton pack with Mack's Factory Parts? Join the Facebook group:
https://www.facebook.com/groups/2806200899664790/
- October 27th, 2021, 11:22 pm#4958349
Davideverona wrote: ↑October 27th, 2021, 11:15 pm I'm afraid to think what the shipment tag will be.it said $29.99 when checking out
deadderek liked this
- October 28th, 2021, 12:45 am#4958359
The Hasbro pack is a nice toy but look at it for more than a few seconds and you start to see the glaring inaccuracies.
The booster ladder texture on the ribs is wrong, the filler tube is upside down, the yellow hose is the wrong colour, type and doesnt have the black stripe, ribbon cable wasnt even attempted to be the right gauge, the fittings are wrong, everything is molded into the shell so they arent easily replaceable, no alice frame the straps just come out of the motherboard, etc..
deadderek wrote: ↑October 27th, 2021, 9:54 pm Your card won't be charged until December 12th, so you'll just want to make sure the money is there on that date. You're charged absolutely nothing in the meantime.That's quite the statement to make. This pack is 100% 3d Printed and I made it for around the same amount of money they are charging for just the pack alone.
Also NO 3-D printer will come close to putting out a pack this nice at this price point.
Hasbro equipment is far superior to anything coming out of one of those.
Not to mention with lights and sounds, etc.
No fan out there will be making an Afterlife pack this good at this price.
The Hasbro pack is a nice toy but look at it for more than a few seconds and you start to see the glaring inaccuracies.
The booster ladder texture on the ribs is wrong, the filler tube is upside down, the yellow hose is the wrong colour, type and doesnt have the black stripe, ribbon cable wasnt even attempted to be the right gauge, the fittings are wrong, everything is molded into the shell so they arent easily replaceable, no alice frame the straps just come out of the motherboard, etc..
- October 28th, 2021, 12:57 am#4958360
TheLegendOfMart wrote: ↑October 28th, 2021, 12:45 amThat entire pack with electronics and sounds came to be around $400 USD only??? There’s no waydeadderek wrote: ↑October 27th, 2021, 9:54 pm Your card won't be charged until December 12th, so you'll just want to make sure the money is there on that date. You're charged absolutely nothing in the meantime.That's quite the statement to make. This pack is 100% 3d Printed and I made it for around the same amount of money they are charging for just the pack alone.
Also NO 3-D printer will come close to putting out a pack this nice at this price point.
Hasbro equipment is far superior to anything coming out of one of those.
Not to mention with lights and sounds, etc.
No fan out there will be making an Afterlife pack this good at this price.
The Hasbro pack is a nice toy but look at it for more than a few seconds and you start to see the glaring inaccuracies.
The booster ladder texture on the ribs is wrong, the filler tube is upside down, the yellow hose is the wrong colour, type and doesnt have the black stripe, ribbon cable wasnt even attempted to be the right gauge, the fittings are wrong, everything is molded into the shell so they arent easily replaceable, no alice frame the straps just come out of the motherboard, etc..
deadderek liked this
- October 28th, 2021, 1:10 am#4958361
jonogunn wrote: ↑October 28th, 2021, 12:57 am That entire pack with electronics and sounds came to be around $400 USD only??? There’s no wayYes. 4 rolls of £12.99 filament, £8 arduino for lights and £5 arduino compatible sound chip, leds are extremely cheap to buy, coded and assembled by myself. You'd be surprised how cheap things are if you make them yourself.
Demon Vice Commander liked this
- October 28th, 2021, 1:34 am#4958362
Also I absolutely stand by my statement Hasbro's equipment absolutely produces better than some cheapo 3D printer you buy off the shelf of Micro Center.
TheLegendOfMart wrote: ↑October 28th, 2021, 12:45 amPack inaccuracies? We should probably wait until the movie actually comes out and we can frame by frame look at the packs to call out some supposed inaccuracies.deadderek wrote: ↑October 27th, 2021, 9:54 pm Your card won't be charged until December 12th, so you'll just want to make sure the money is there on that date. You're charged absolutely nothing in the meantime.That's quite the statement to make. This pack is 100% 3d Printed and I made it for around the same amount of money they are charging for just the pack alone.
Also NO 3-D printer will come close to putting out a pack this nice at this price point.
Hasbro equipment is far superior to anything coming out of one of those.
Not to mention with lights and sounds, etc.
No fan out there will be making an Afterlife pack this good at this price.
The Hasbro pack is a nice toy but look at it for more than a few seconds and you start to see the glaring inaccuracies.
The booster ladder texture on the ribs is wrong, the filler tube is upside down, the yellow hose is the wrong colour, type and doesnt have the black stripe, ribbon cable wasnt even attempted to be the right gauge, the fittings are wrong, everything is molded into the shell so they arent easily replaceable, no alice frame the straps just come out of the motherboard, etc..
Also I absolutely stand by my statement Hasbro's equipment absolutely produces better than some cheapo 3D printer you buy off the shelf of Micro Center.
Want to mod your HasLab Pack, Trap, or PKE meter? Join the Facebook group:
https://www.facebook.com/groups/ghostbustersmodders
Putting together your proton pack with Mack's Factory Parts? Join the Facebook group:
https://www.facebook.com/groups/2806200899664790/
https://www.facebook.com/groups/ghostbustersmodders
Putting together your proton pack with Mack's Factory Parts? Join the Facebook group:
https://www.facebook.com/groups/2806200899664790/
- October 28th, 2021, 1:35 am#4958363
TheLegendOfMart wrote: ↑October 28th, 2021, 1:10 amWell since they're so cheap feel free to help out the fans and sell them.jonogunn wrote: ↑October 28th, 2021, 12:57 am That entire pack with electronics and sounds came to be around $400 USD only??? There’s no wayYes. 4 rolls of £12.99 filament, £8 arduino for lights and £5 arduino compatible sound chip, leds are extremely cheap to buy, coded and assembled by myself. You'd be surprised how cheap things are if you make them yourself.
Want to mod your HasLab Pack, Trap, or PKE meter? Join the Facebook group:
https://www.facebook.com/groups/ghostbustersmodders
Putting together your proton pack with Mack's Factory Parts? Join the Facebook group:
https://www.facebook.com/groups/2806200899664790/
https://www.facebook.com/groups/ghostbustersmodders
Putting together your proton pack with Mack's Factory Parts? Join the Facebook group:
https://www.facebook.com/groups/2806200899664790/
- October 28th, 2021, 1:47 am#4958365
I only use cheapo 3D printers. That pack was made with £230 CR10.
deadderek wrote: ↑October 28th, 2021, 1:34 amWe've already seen the Phoebe Hero pack at Adam Savages workshop...
Pack inaccuracies? We should probably wait until the movie actually comes out and we can frame by frame look at the packs to call out some supposed inaccuracies.
Also I absolutely stand by my statement Hasbro's equipment absolutely produces better than some cheapo 3D printer you buy off the shelf of Micro Center.
I only use cheapo 3D printers. That pack was made with £230 CR10.
deadderek wrote: ↑October 28th, 2021, 1:35 am Well since they're so cheap feel free to help out the fans and sell them.Theres a difference between cheap and ready for consumers. The wiring was a mess and not something I'd be comfortable in selling.
- October 28th, 2021, 1:49 am#4958366
TheLegendOfMart wrote: ↑October 28th, 2021, 1:47 amWe've no idea when that video was filmed. There's absolutely a chance the pack is worked on or tinkered with at some point during the flick. Still makes more sense to wait then start going crazy over alleged inaccuracies.deadderek wrote: ↑October 28th, 2021, 1:34 amWe've already seen the Phoebe Hero pack at Adam Savages workshop...
Pack inaccuracies? We should probably wait until the movie actually comes out and we can frame by frame look at the packs to call out some supposed inaccuracies.
Also I absolutely stand by my statement Hasbro's equipment absolutely produces better than some cheapo 3D printer you buy off the shelf of Micro Center.
I only use cheapo 3D printers. That pack was made with £230 CR10.
Want to mod your HasLab Pack, Trap, or PKE meter? Join the Facebook group:
https://www.facebook.com/groups/ghostbustersmodders
Putting together your proton pack with Mack's Factory Parts? Join the Facebook group:
https://www.facebook.com/groups/2806200899664790/
https://www.facebook.com/groups/ghostbustersmodders
Putting together your proton pack with Mack's Factory Parts? Join the Facebook group:
https://www.facebook.com/groups/2806200899664790/
- October 28th, 2021, 1:50 am#4958367
3,200 backers. Yeah I think we should expect this one to happen.
Want to mod your HasLab Pack, Trap, or PKE meter? Join the Facebook group:
https://www.facebook.com/groups/ghostbustersmodders
Putting together your proton pack with Mack's Factory Parts? Join the Facebook group:
https://www.facebook.com/groups/2806200899664790/
https://www.facebook.com/groups/ghostbustersmodders
Putting together your proton pack with Mack's Factory Parts? Join the Facebook group:
https://www.facebook.com/groups/2806200899664790/
- October 28th, 2021, 1:51 am#4958368
deadderek wrote: ↑October 28th, 2021, 1:49 am We've no idea when that video was filmed. There's absolutely a chance the pack is worked on or tinkered with at some point during the flick. Still makes more sense to wait then start going crazy over alleged inaccuracies.Backtrack all you want. We know it was filmed AFTER the movie had finished production because Ben Eadie and Jason were both in Adams Workshop. The inaccuracies are glaring and not something that would be changed during production and its 100% possible to make a way better looking pack compelte with wand for less than Hasbro are charging.
- October 28th, 2021, 2:13 am#4958370
With the announcement and day over, everyone please take all discussion of the Hasbro Pulse HasLab Spengler's Proton Pack to here:
viewtopic.php?f=90&p=4958348
or to here:
viewtopic.php?f=54&t=48504
Thanks and let's get back on topic about the movie. And a general remainder to not get too heated with each other about things like pack accuracy.
viewtopic.php?f=90&p=4958348
or to here:
viewtopic.php?f=54&t=48504
Thanks and let's get back on topic about the movie. And a general remainder to not get too heated with each other about things like pack accuracy.
- October 28th, 2021, 2:51 am#4958375
Oh HELL yeah. My local AMC just posted pre-sale tix for Afterlife.
Sav C liked this
Want to mod your HasLab Pack, Trap, or PKE meter? Join the Facebook group:
https://www.facebook.com/groups/ghostbustersmodders
Putting together your proton pack with Mack's Factory Parts? Join the Facebook group:
https://www.facebook.com/groups/2806200899664790/
https://www.facebook.com/groups/ghostbustersmodders
Putting together your proton pack with Mack's Factory Parts? Join the Facebook group:
https://www.facebook.com/groups/2806200899664790/
- October 28th, 2021, 5:21 am#4958385
Also tons of people like to buy tickets early to pick the best seats.
Bison256 wrote: ↑October 28th, 2021, 4:49 amI live in a major metropolitan area, movies absolutely do sell out.deadderek wrote: ↑October 28th, 2021, 2:51 am Oh HELL yeah. My local AMC just posted pre-sale tix for Afterlife.Is that really necessary? I've never seen a movie sold out.
Also tons of people like to buy tickets early to pick the best seats.
Want to mod your HasLab Pack, Trap, or PKE meter? Join the Facebook group:
https://www.facebook.com/groups/ghostbustersmodders
Putting together your proton pack with Mack's Factory Parts? Join the Facebook group:
https://www.facebook.com/groups/2806200899664790/
https://www.facebook.com/groups/ghostbustersmodders
Putting together your proton pack with Mack's Factory Parts? Join the Facebook group:
https://www.facebook.com/groups/2806200899664790/
- October 28th, 2021, 6:47 am#4958394
Davideverona wrote: ↑October 28th, 2021, 3:14 am On the Hasbro video there is a brief scene with Phoebe going full Tex on Muncher.That was pretty wild. A few seconds, but totally.
This Post Contains Spoilers
- October 28th, 2021, 7:07 am#4958398
How are these last 30-40 days taking so long?
Seems like an age since NYCC.
Seems like an age since NYCC.
Did it come out today? Ugh the art is so bad tho[…]