This is for other Ghostbusters Props that don't fit into the categories above.
By troberts289
#4985336
First off, a confession: I've never been that into any of the steam punk Ghostbuster builds I've seen online. Nothing wrong with them, I just wasn’t that into them.

Maybe I've spent too much time freeze framing trying to build “exact” props. Maybe its because, as a hobby machinist, and a card carrying member of the National Association of Watch and Clock Collectors, I just like real steam engines an clocks too much....

But, a few weekends ago my wife and I went to the Key City Steampunk Show. I'm glad I didn't wear my pack.... I would have been the only cross genre guy there... but it was just a real fun crowd to hang out in, and a lot of people there were leaning more into Victorian era fantasy and mysticism, and I got inspired...

I started sketching and collecting parts right away. And today I started making my first cuts....

Image
Image

I started by making the pentagram parts for my séance circle / cyclotron

Image
(Take notes steampunks, THIS is the best machine ever.)

Image
Image
Image


..... This is going to be a real long haul project..... I'm actually in the middle of relocating my wood shop right now, which is going to stop this project dead it its tracks real soon.... but I'm still really excited about being a Victorian Ghostbuster....
DrMadKatz, jackdoud liked this
By troberts289
#4985574
Image
Image

I finished, burnt and clear coated the steel parts for my protection sigil/ cyclotron.

This will probably be the last post for a while. I'm currently neck deep in setting up a new shop. When it's done I'll be living every man's dream: my bed, toilet, and work shop will all be within 100 paces of one another.
jackdoud liked this
By troberts289
#4997041
Since September I put up a new shop building, and built a workbench, outfeed table, chop station, Drill press table, router table, and an electric guitar.

Now is finally time to bring this tread back to life. I got started on the cyclotron casing this weekend.

Image
Image
Image
Image
Image
Image
Image
RiverofSlime, jackdoud liked this
By troberts289
#4997295
I'm shooting for 35 lbs (the same as my movie pack)

The cherry I'm using is relatively low density, so (figures crossed), it should be lighter than it looks.
User avatar
By Macktacular
#4997320
This is looking really, really interesting. I like how you're taking advantage of the artistry of some premade components and putting them into new context. Are those old serving trays in the cyclotron or a canopy/accent for a ceiling light?
By troberts289
#4998190
I've been working on a lot of small detail fitting..... I think I've got all the hardware for the straps figured out.

I'm still going back and forth on what I want to do for the ion arm.
User avatar
By edspengler
#4998218
This is a great build and I have enjoyed reading through the posts. Have you given any thought to the “operational principle” of the pack? The movie packs are nuclear powered, however this could not be the case for the Victorian era pack. I could see this one being powered by a series of exothermic chemical reactions that would then generate electrical arcs at a certain phase that can be focused through the wand.
By troberts289
#4998264
My thinking is that in the 20th century our popular fiction leans on nuclear pseudoscience and practical physics; in the 18th and 19 centuries it would have been more about the occult.

The pack is a machine that aids in the performance of a séance and siphons psychic energy off of spirits, without the use of a medium and a group of people. That's why I replaced the cyclotron with a pentagram.

As far as the power source goes: You're right, something electrical from the early days of Edison and Tesla makes sense. My old man suggested some kind of a crank that charges a magneto. I immediately starting thinking about a big crank generator that could be connected to the pack to charge it.... but right now my focus is on getting the pack, wand and trap ready for our local steam punk convention in August.

I also have an old bottle that I was planning to use for a liquid element that takes the place of the power cells, so the pack would be powered by some kind of chemical /ectoplasm reaction, but I'm not sure if that's going to make it on or not. weight is a factor, I do plan on wearing this thing to conventions.

That's one of issues I've had with other more "steam punky" builds. They just don't look like a person could carry them around.
pda4ever, edspengler liked this
By troberts289
#4998265
I spent most of the weekend out in the shop, but don't have pictures to show for it. Spend a lot of time just working out how the wand a trap will go together.
User avatar
By gamera1968
#4998315
This is going to be an interesting take on the pack and wand. Looks great, so far!!
By troberts289
#4998682
I was hoping to have more pictures to share after this weekend, but I suffered a setback. I spent no small amount of time making a “lock plate” out of a piece of scrap steel and inlaying it into the stock... only to discover that I made the plate backwards, and accidentally built a lefty.

Gotta tell you, it's a real embarrassment. I’ve built REAL flintlock rifles before... I REALLY should have noticed sooner.

Anyway, I’m happy to confess it here, because everyone should know: you can’t roll over and let your mistakes hurt you even more. I’m about halfway through making a second lock plate and should have some new picks up soon.

I’ve also been spending a lot of time tweaking little details and working out the electronics; and my wife is starting to get rolling on the fabric parts.

I’m getting a little nervous about making the con in August..... but if we don’t make it, there’s always other cons.
Image
By troberts289
#4998824
Biggest problem I have right now is figuring out the connection between the pack and wand, and exactly how they're going to attach.

I wandered around a few antique stores today hoping for inspiration, but still no dice.
By troberts289
#4999130
I decided to run the wand connection through the belt gizmo. That way I have an easy place to disconnect the wand from, and a place to hide the buttons that control the colors on the LEDs


Image
Image
Image
jackdoud liked this
User avatar
By mburkit
#5000073
I just want to say, this is the best Steampunk proton pack project I've ever seen. Much like you, I also feel that I have never (up until this point) have seen any steam punk proton packs that really got the aesthetic correct. I have secretly been wanting to build my own steam punk pack for years now; often citing to my friends that there truly is a way to make "steampunk cool," instead of lame Victorian outfits with gears hot glued to the hats and goggles. You are nailing it so far. I personally would love to see an update to this pack, if there are any.
edspengler liked this

It's a bit of a cheat, because it wasn't used at t[…]

A Victorian Ghostbuster

https://i.imgur.com/SXSQ384.jpeg https://i.imgu[…]

Proton Props UK

Hi all just a heads up mike nelson of karnivours c[…]

We have a group! The Southeast Washington Ghostbus[…]