By Elliott52
#4999966
Hello, I have just installed the GBFans wand electronics into my Spirit full-size pack however the bottom four bars are not lighting up. I have verified that the blue stiffener of the cable is oriented the right way as shown on the instructions PDF. Changing the potentiometer to other modes does make those four light up. Advice on fixing this would be appreciated.

Image
User avatar
By prodestrian
#4999967
Elliott52 wrote: September 8th, 2024, 8:33 pmChanging the potentiometer to other modes does make those four light up.
Just to clarify, you said that changing the potentiometer to other modes DOES make them light up? So it's only not working in a specific mode? If so, which modes work and which ones don't?
By Elliott52
#4999971
The whole bargraph is able to light up on the test modes at both ends. The movie and special effect modes have it partially lit up.

Also providing a picture of the ribbon connection.

Image
User avatar
By prodestrian
#4999998
Looking at other people's photos of the kit, your photo looks correct (and matches the documentation). Their kits worked, yours doesn't.

The 28 segment bargraph is available in two variants, the pin layout is identical but one is Common Anode and one is Common Cathode. It has either 7 + 4 pins or 4 + 7 pins depending which variant (11 pins total). But the bargraph board has 16 pins, it's a 16 wire bargraph.

So I'm wondering if perhaps Spongeface designed the board to work with both variants of the bargraph, and the latest run uses a different variant to the documentation and requires the ribbon cable to be flipped (like you've both done).

I've bought many of these bargraph LEDs in the past and sometimes one variant is sold out, so it makes sense to be able to support both types rather than waiting months/years to manufacture more. What impresses me is the design of the PCB, being able to support both variants is seriously clever design on Spongeface's part.

Glad you both got it working! Maybe the documentation needs an update so people can tell which way the ribbon cable should go depending on which variant they were shipped.
    Proton Props UK

    You would think that if his entire business page […]

    Spirit/Qpack hybrid

    Now, on to the belt gizmo…

    Any Arkansas Ghostbusters?

    Any chances there are any fellow Ghostbusters arou[…]

    Books featured on screen

    Was also able to pick this book up for a very re[…]