By Stantz1981
#4920646
Does anyone know what type/make/model the heatsink was used on the roof rack? The one towards the rear near the radome.
User avatar
By 910dohead
#4920708
It's unknown. Basically, it's two identical heatsinks connected back-to-back. It also appears on the Ecto-1A. I have been trying to ID it for years. I think they may have either come from the inside of a massive computer workstation from a company called Burroughs or out of equipment found on a Lockheed P3 Orion surveillance aircraft, but I don't have the proof.
By DeLoreanDMC81
#4930934
910dohead wrote: February 7th, 2020, 8:40 pm This is a picture of the correct heatsink on the Ecto-1. It's actually two separate heatsinks bolted together and not a single one. Plus, the way the fins are designed possibly makes it proprietary.

Actually, that is the heat sink that got replaced in the "first" restoration. Probably around 1986 - 1988, just before Ghostbusters 2. And it's the one they've kept on the car ever since. In fact, that is the same kind of heat sink that is used on the Ecto-1A.

The true original heat sink is like the one I have. Here are some pictures of the original black heat sink on the original filming car.

Image

Image

In this picture, just above Ray's head, the original black heat sink can be seen:

Image
User avatar
By Kingpin
#4965870
The Searcher wrote: January 21st, 2022, 2:21 am Isn’t the original black heat sink present here on the original Ectomobile in the opening of Ghostbusters 2?:
Image
Sadly no, it looks like the heatsink on Ecto-1 at the start of GBII was the version 910dohead posted earlier in the thread:

Image
By The Searcher
#4965936
It appears my eyes have deceived me, but upon looking more closely, I can tell that it is not the original heat sink.
User avatar
By 910dohead
#4966360
Yeah, James/DeLoreanDMC81 is 1000% correct here. The heatsinks were swapped out sometime before Ghostbusters 2. The heatsink that's on the Ecto-1 seen in the opening of the second film is the one that's currently on the car now. Learning this blew my mind and still amazes me that there's always more to learn about the props. Some 35+ years later and we're still figuring this stuff out.
User avatar
By Arty V
#4966368
Taking a break from working on a Saturday; my stab at an ID of the heatsink that was posted by DeLoreanDMC81 and GraygoryGruesome. Guessing that a large heatsink like this is/was designed with a particular component or class-size of component for particular application. I found multiple very similar designs from different companies. My best guess:

#60105 profile from AAVID Thermalloy, now part of Boyd Corporation.
Aavid Thermalloy catalog page:
https://info.boydcorp.com/hubfs/Thermal ... -Guide.pdf.
Go to PDF page 53 and look at #11
Listing from the Boyd Corporation:
https://www.boydcorp.com/files/part-doc ... rawing.png
By ZedR
#4966789
The Searcher wrote:The folks working on the Northern Illinois Ghostbusters 2 Ectomobile recently acquired what appears to be the correct heat sink:
Image
It's being sold by our own 910dohead here in the for sale section.
910dohead liked this
User avatar
By 910dohead
#4966793
Yeah, they need a little cleanup but will look great afterwards. I just got around to cleaning off the set I have for myself. They've most likely been sitting in dirt since date of manufacture, so who knows for how long?
By DeLoreanDMC81
#4967116
The Searcher wrote: February 5th, 2022, 2:32 am The folks working on the Northern Illinois Ghostbusters 2 Ectomobile recently acquired what appears to be the correct heat sink:
Image
I also got a set of those. And they are dead on for what is on the original Ecto-1A, and that horrible excuse of a restoration, the original Ecto-1.

    Ghostbusters 5: chiropractors for hire. Walk in's […]

    Goggle LED positions.

    Hi @busybuildr do you have blueprints (or simila[…]

    I built my Lifegard 2

    thanks for your compliments BRD

    New version of the Spirit PKE

    So, is the fact that the lights and sounds cut out[…]