Discuss the upcoming movie to be released in 2020 and directed by Jason Reitman.
User avatar
By RedSpecial
#4957984
No files that I know of so far.

I won't be adding it to my current pack as it'd seem out of place but if i ever build a Phoebe pack I 100% will.
The sounds compliment the run down look of that pack perfectly.
Although I'm really looking forward to hearing what everyone else does with it
By ecto88mph
#4958126
RedSpecial wrote: October 23rd, 2021, 12:10 pm I've isolated the audio for the pack and thrower power up sequences but someone more savvy than me would need to remove the extraneous audio.
Wow thanks for that. I have a hour long loop of the pack hum and I put this in front of it, it sounds great.
RedSpecial, SpaceBallz liked this
By Makuta
#4959416
MagicPrime wrote: October 26th, 2021, 1:08 pm I can't wait to start seeing fan builds or revisions/upgrades with spinning LEDs inside the cyclotron.
ive been seeing some people doing this, but i would love to see something like this that is compatible with the GBfans electronic kits, something that can change color to TVG colors too.
Jimsy33 liked this
By Gucabe
#4959475
I made my first proton pack recently and since I saw that afterlife clip I wanted to add the cyclotron effect. I used an arduino and some neopixels, did the code and programmed it. I took the sound from the clip and spliced it. Use a sound board from adafruit and voila.

This is before the sound
https://youtube.com/shorts/aNqlDHqQijk?feature=share

This is with the sound added.
https://youtube.com/shorts/dm_V6knCYcM?feature=share
By Makuta
#4959514
Gucabe wrote: November 9th, 2021, 7:10 am I made my first proton pack recently and since I saw that afterlife clip I wanted to add the cyclotron effect. I used an arduino and some neopixels, did the code and programmed it. I took the sound from the clip and spliced it. Use a sound board from adafruit and voila.

This is before the sound
https://youtube.com/shorts/aNqlDHqQijk?feature=share

This is with the sound added.
https://youtube.com/shorts/dm_V6knCYcM?feature=share
that looks amazing, best looking one I've seen so far, even when going fast it looks like its spinning instead of just flashing.


i look RedSpecial's sounds and put in onto a copied file of the GBfans mini SD card sounds.
i replaced it with track 10 "010 protongun_powerup".
sounds great but the lights dont begin to cycle until the idle hum sounds begin, not really sure if there is any way to fix this by maybe editing a different sound file.
here is a video of activation sound vs lights:

Last edited by Kingpin on November 9th, 2021, 6:52 pm, edited 1 time in total.Reason: Added YouTube code
kahuna900, Gucabe, Jimsy33 liked this
User avatar
By Jimsy33
#4960936
Makuta wrote: November 9th, 2021, 4:52 pm
Gucabe wrote: November 9th, 2021, 7:10 am I made my first proton pack recently and since I saw that afterlife clip I wanted to add the cyclotron effect. I used an arduino and some neopixels, did the code and programmed it. I took the sound from the clip and spliced it. Use a sound board from adafruit and voila.

This is before the sound
https://youtube.com/shorts/aNqlDHqQijk?feature=share

This is with the sound added.
https://youtube.com/shorts/dm_V6knCYcM?feature=share
that looks amazing, best looking one I've seen so far, even when going fast it looks like its spinning instead of just flashing.


i look RedSpecial's sounds and put in onto a copied file of the GBfans mini SD card sounds.
i replaced it with track 10 "010 protongun_powerup".
sounds great but the lights dont begin to cycle until the idle hum sounds begin, not really sure if there is any way to fix this by maybe editing a different sound file.
here is a video of activation sound vs lights:

Turn the potentiometer on the powercell board to change the animation to movie mode, that way there is no "power up" animation and it directly cycles. It's in the instructions.
By Makuta
#4961017
i see, i usually leave my pack in TVG mode since that is what my pack emulates more (and switching between sound/color modes is fun).

maybe this sound effect just isn't in the cards for my pack.
User avatar
By Jimsy33
#4961546
Makuta wrote: November 21st, 2021, 7:51 pm i see, i usually leave my pack in TVG mode since that is what my pack emulates more (and switching between sound/color modes is fun).

maybe this sound effect just isn't in the cards for my pack.
Disabling the "Power up" animation won't affect the video game mode, you'll still be able to switch between the firing modes and colours. It's just that the cyclotron will directly cycle instead of fading on, and the lights will snap on and off instead of fadind like in the video game. That way there is no delay when you turn the pack on, it directly cycles.
By dantonvfx
#4961588
Gucabe wrote: November 9th, 2021, 7:10 am I made my first proton pack recently and since I saw that afterlife clip I wanted to add the cyclotron effect. I used an arduino and some neopixels, did the code and programmed it. I took the sound from the clip and spliced it. Use a sound board from adafruit and voila.

This is before the sound
https://youtube.com/shorts/aNqlDHqQijk?feature=share

This is with the sound added.
https://youtube.com/shorts/dm_V6knCYcM?feature=share
That is amazing!!!!! Could you share a tutorial or something about how you did it? I would like to add this sound and light effect to the Spirit Pack, I have the Ghostlab light kit, but no soundboard.... I was going to order the GBFans sound board but did not yet... Maybe its because I was waiting for this moment!!!!

I'm really bad with arduino, so I wonde rif you can do a detailed explanation or tutorial, or if you would do comision?

I've been investigating a bit, the Audio output seems pretty straight forward, it has a Line out, so you cna connect a speaker thru it. I wonder if ther eis any way to wire your own speakers, in case you want to have 2 speakers for example? Is there a limitation about Speakers Wats? I also wonder, how do you connect the soundboard with the lights to activate both wiht the same switch?


Cheers
gamera1968, Gucabe, Merrimon liked this
By Gucabe
#4961605
dantonvfx wrote: November 25th, 2021, 10:40 am
Gucabe wrote: November 9th, 2021, 7:10 am I made my first proton pack recently and since I saw that afterlife clip I wanted to add the cyclotron effect. I used an arduino and some neopixels, did the code and programmed it. I took the sound from the clip and spliced it. Use a sound board from adafruit and voila.

This is before the sound
https://youtube.com/shorts/aNqlDHqQijk?feature=share

This is with the sound added.
https://youtube.com/shorts/dm_V6knCYcM?feature=share
That is amazing!!!!! Could you share a tutorial or something about how you did it? I would like to add this sound and light effect to the Spirit Pack, I have the Ghostlab light kit, but no soundboard.... I was going to order the GBFans sound board but did not yet... Maybe its because I was waiting for this moment!!!!

I'm really bad with arduino, so I wonde rif you can do a detailed explanation or tutorial, or if you would do comision?

I've been investigating a bit, the Audio output seems pretty straight forward, it has a Line out, so you cna connect a speaker thru it. I wonder if ther eis any way to wire your own speakers, in case you want to have 2 speakers for example? Is there a limitation about Speakers Wats? I also wonder, how do you connect the soundboard with the lights to activate both wiht the same switch?


Cheers
Sure thing Ill post what I did to mine, just let me clean up the code and work out some diagrams and a part list. I have made some improvements since that video, mostly cleaning up the audio a bit more and trying to sync it better.
CaptainAssholay liked this
By dantonvfx
#4961617
Gucabe wrote: November 25th, 2021, 1:22 pm
dantonvfx wrote: November 25th, 2021, 10:40 am

That is amazing!!!!! Could you share a tutorial or something about how you did it? I would like to add this sound and light effect to the Spirit Pack, I have the Ghostlab light kit, but no soundboard.... I was going to order the GBFans sound board but did not yet... Maybe its because I was waiting for this moment!!!!

I'm really bad with arduino, so I wonde rif you can do a detailed explanation or tutorial, or if you would do comision?

I've been investigating a bit, the Audio output seems pretty straight forward, it has a Line out, so you cna connect a speaker thru it. I wonder if ther eis any way to wire your own speakers, in case you want to have 2 speakers for example? Is there a limitation about Speakers Wats? I also wonder, how do you connect the soundboard with the lights to activate both wiht the same switch?


Cheers
Sure thing Ill post what I did to mine, just let me clean up the code and work out some diagrams and a part list. I have made some improvements since that video, mostly cleaning up the audio a bit more and trying to sync it better.
YOU ARE MY HERO!!!

YOU ARE SAVING ME! Really!!! I was going to order the GBFans SoundBoard, but I was not all in due to having to wait until March to recieve it :(

If you could tell me what components do I need to buy I will start buying them right away so I have all ready for when you are :D

Cheers!!!

    It's only been a few days since we hit 11k marshma[…]

    There are two smaller things I noticed between tra[…]

    Saving the world or not, why did they choose to h[…]

    According to Bleeding Cool News, IDW is set to los[…]